Components
Our Component Products Include:
SF Standard
SF Standard Duty
SFR Range Special
SF Standards
Standard components for training, competition and general shooting applications that perform much like traditional FMJ but do not have jacket/plating. The characteristics of these components are: Frangible, controlled fragmentation, reduced hazard and no ricochet on metal targets.
(Additional calibers will be added)
Standard Pistol Components
Standard Pistol Components - Watch the Video
Item # |
Weight (grains) |
OD (inches) |
Cartridge OAL (inches) |
Typical Velocity |
SF380-75 |
75 |
0.356 |
0.948 |
1000 |
SF9-100 |
100 |
0.355 |
1.12 |
1250 |
SF357SIG-100 |
100 |
0.355 |
1.13 |
1450 |
SF38-110 |
110 |
0.357 |
1.5 |
1050 |
SF38-125 |
125 |
0.357 |
1.5 |
1025 |
SF40-125 |
125 |
0.4 |
1.12 |
1200 |
SF40-135 |
135 |
0.4 |
1.12 |
1175 |
SF44-180 |
180 |
0.43 |
1.61 |
1400 |
SF45-155 |
155 |
0.451 |
1.21 |
1150 |
SF45-165 |
165 |
0.451 |
1.21 |
1075 |
SF45-175 |
175 |
0.451 |
1.21 |
1020 |
RHFP = Reduced Hazard Flat Point
RHVF = Reduced Hazard V-Force
< back to top >
Standard Rifle and Shotgun Components
Standard Rifle Components - Watch the Video
|
RHVF = Reduced Hazard V-Force
WTP = Wide Taper Point
NTP = Narrow Taper Point
** .223/5.56mm - .308/7.62mm projectiles can be designed to have increased or decreased penetration at either subsonic or high velocities
** = For use with weapons with a 1 & 7 twist
< back to top >
Standard 50 BMG Components - Watch the Video
The SinterFire® 50 BMG is constructed of the same virgin copper/tin material that is used in all of the SinterFire® projectiles. It has the same wide taper point nose as all of the SinterFire® rifle products so it can be easily identified during training or duty use.
Item # |
Weight (grains) |
OD |
Cartridge OAL (inches) |
Typical Velocity |
SF50BMG-700 WTP |
700 |
0.510 |
Max OAL 5.450 |
Per App. |
SF50BMG-770 WTP |
770 |
0.510 |
- |
Per App. |
WTP = Wide Taper Point
Standard Shotgun Components - Watch the Video
|
RHBS = Reduced Hazard Buck Shot
RHSS = Reduced Hazard Shotgun Slug
RHVF = Reduced Hazard V-Force
WTP = Wide Taper Point
NTP = Narrow Taper Point
- .223/5.56mm projectiles can be loaded as a ballistic match to M-855 for use in Colt M-4
- .223/5.56mm - .308/7.62mm projectiles can be designed to have increased or decreased penetration at either subsonic or high velocities
- ** = For use with weapons with a 1 & 7 twist
< back to top >
SF Standard Duty
Includes standard hollow point cavity in handgun calibers. Designed for defensive and LE applications and effectively reduces the hazards, collateral damage and liabilities caused by missed shots in hardened environments. The characteristics of these components are: Frangible, controlled fragmentation, reduced hazard and no ricochet.
Standard Hollow Point Components
Hollow Point Components
|
RHHP = Reduced Hazard Hollow Point
< back to top >
SFR Range Special
This family of bullets will out-perform anything of comparable weight. The same virgin copper/tin composite materials are used, performance is improved, the cost is less and quality is not compromised. These bullets are being marketed as a low cost alternative to OEM ammunition manufacturers and indoor/outdoor range operators that load their own range ammo. The characteristics of these components are: Frangible, controlled fragmentation, reduced hazard and no ricochet on metal targets.
SFR Range Special Components
SFR Range Special Components
|
RHVF = Reduced Hazard V-Force
+/- Velocity per application
Note: All components can be modified per requirement and/or customer specifications.
< back to top >
Disclaimer: SinterFire® Bullets are frangible projectiles that perform and load differently than traditional lead bullets. Extra care in loading and crimping is required with SinterFire® bullets. All data presented by SinterFire® is for reference purposes only. It is intended for use by persons familiar with loading practices, ballistics, their ability, and loading equipment. If you are not knowledgeable of the loading process and the dangers associated, seek the advice of a professional. Since loading practices are beyond SinterFire®’s control, SinterFire® disclaims all responsibility either expressed or implied for injuries and/or death.
